3139 116 19401
9
English
Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby
mode.
– to use for EASY SET.
2 DIGITAL SOUND CONTROL
DISPLAY PANEL
– to view the desired DSC display.
3 DBB (DYNAMIC BASS BOOST)
– to switch on bass boost, to enhance
bass response or to switch off bass
boost.
4 VEC
– to select the desired Virtual
Environment Control effect : HALL,
CINEMA or CONCERT.
5 DSC
– to select the desired sound effect :
OPTIMAL, JAZZ, ROCK or TECHNO.
6 JOG CONTROL
– to select the desired DSC setting. You
must select the DSC feature first.
– to select the desired VEC setting. You
must select the VEC feature first.
7 PROGRAM
for CD ............ to program CD tracks.
for TUNER ..... to program preset radio
stations.
for CLOCK ..... to select 12- or 24-
hour in clock setting
mode.
8 MICROPHONE
(not available for
version /30)
– to connect microphones jack.
9 MIC LEVEL
(not available for version
/30)
– to adjust the mixing level for karaoke
or microphone recording.
0 RECORD
– to start recording on tape deck 2 only.
! DISPLAY SCREEN
– to view the current setting of the
system.
@ CD CAROUSEL TRAY
# DISC CHANGE
– to change CD(s).
$ OPEN•CLOSE
– to open or close the CD carousel tray.
% DISC 1 / DISC 2 / DISC 3 (CD
DIRECT PLAY)
– to select a CD tray for playback.
^ SOURCE – to select the following:
CD / (CD 1•2•3)
– to select CD mode. When CD playback
is stopped, press to select disc tray 1,
2 or 3.
TUNER / (BAND)
– to select Tuner mode. When in tuner
mode, press to select the waveband:
FM or MW.
TAPE / (TAPE 1• 2)
– to select Tape mode. When tape
playback is stopped, press to select
either tape deck 1 or 2.
AUX (CDR/VIDEO)
– to select sound from an external
source (e.g. TV, VCR, Laser Disc player,
DVD player or CD Recorder).
& MODE SELECTION
SEARCH à á (TUNING à á)
for CD ............ to search backward/
forward.
for TUNER ...... to tune to a lower or
higher radio frequency.
for TAPE ....... to rewind or fast
forward on tape.
for CLOCK ..... to set the hour
(on the
system only)
.
STOP•CLEAR Ç
for CD ............ to stop CD playback or
to clear a program.
for TUNER ..... to stop programming.
for TAPE ........ to stop playback or
recording.
for DEMO ......
(on the system only)
to
start or stop
demonstration mode.
PLAY É / PAUSE Å
for CD ............ to start or interrupt
playback.
for TAPE ........ to start playback.
PREV í / NEXT ë(PRESET 43 )
for CD ............ to skip to the beginning
of the current, previous,
or next track.
for TUNER ..... to select a preset
station in memory.
for CLOCK ..... to set the minute
(on
the system only).
* VOLUME
– to increase or decrease the volume.
( INCREDIBLE SURROUND
– to switch on or off the surround sound
effect.
) n
– to connect headphones.
¡ CLOCK•TIMER
– to view the clock, set the clock or set
the timer.
™ DIM
– to select different brightness for the
display screen : DIM 1, DIM 2, DIM 3
or DIM OFF.
£ AUTO REPLAY
– to select playback mode either in
continuous AUTO REPLAY or ONCE
only.
≤ DUBBING
– to dub a tape in normal speed.
∞ TAPE DECK 2
§ TAPE DECK 1
≥ REPEAT
– to repeat a CD track, a disc, or all
available discs.
• SHUFFLE
– to play all the available discs and their
tracks in random order.
ª SLEEP
– to switch the system to standby mode
at a selected time.
º B
– to switch the system to standby mode.
CONTROLS
pg 01-24/C38-39/21&/30-En 3/3/00, 4:24 PM9
To Next Page
Loading...
