Philips FW-C85/02RW - Loading a Tape; Tape Playback; Tape

20
English
3139 116 19611
TAPE
STANDBY
ON
MINI HIFI SYSTEM
BANDC1 • 2 • 3
CDR
STOP•CLEAR
SEARCH•TUNING PLAY PAUSE PREV
NEXT
DUB
(HSD)
RECORD
A. REVDIM
CLOCK/
TIMER
PROG
BASS
TREBLE
wOOx
TECHNOLOGY
POWER SAVE
IR SENSOR
SIDE
V
O
L
U
M
E
PLUS
LEVEL
RDS
DOLBY B NR
NEWS/TA
CD TEXT
BAND
PRESET
▲
▲
B
A
S
S
/
T
R
E
B
L
E
TAPE
CD
TUNER
AUX
P
E
R
S
O
N
A
L
D
S
C
V
E
C
TAPE 1•2
CD 1•2•3
CDR/DVD
Loading a tape
1 Press on the tape deck to open the tape
deck door.
2 The tape deck door opens.
3 Load the tape with the open side
downward and the full spool to the left.
4 Close the tape deck door.
Tape Side (only on tape deck 2)
• Press í or ë to select the tape side
for playback or recording.
™ The A (BACK) or B (FRONT) appear
on the display, depending on the tape
side selected.
™ "T2 ! ! !" or "T2 @ @ @" will be
displayed.
™ When recording, the A or B display
will be flashing.
Auto Reverse Playback (only on
tape deck 2)
• Press A. REV to select the different
playback modes.
åå
åå
å ...... to record or playback on one side
of the tape. The tape stops at the
end of one side.
∂∂
∂∂
∂ ..... to record or playback on both
sides of the tape. The tape then
stops.
∫∫
∫∫
∫ ... to playback continuously on both
sides of the tape up to a
maximum of 10 times per side
unless you press Ç.
Tape Playback
1 Press TAPE ( TAPE 1•2 ) to select TAPE
mode.
™ "TAPE 1" or "TAPE 2" will be
displayed, and followed by "T1 or
T2" with "! ! ! or @ @ @".
• Press TAPE ( TAPE 1•2 ) again to select
either tape deck 1 or tape deck 2.
2 Load the tape into the desired tape
deck.
3 Press PLAYÉÅ to start playback.
• If tape 1 is selected for playback;
™ "T1 " with "@" scrolling right will be
displayed.
• If tape 2 is selected for playback;
™ "T2 " with "! or @" scrolling left or
right will be displayed depending on
the tape side selected.
pg 01-29/C85-C83/22-Eng 3/6/00, 1:01 PM20