Philips FW-M567/22 - Specifications

26
English
AMPLIFIER
Output power 2 x 280 W MPO
2 x 140 W RMS
(1)
Signal-to-noise ratio ≥ 75 dBA (IEC)
Frequency response 50 – 18000 Hz, –3 dB
Input sensitivity
AUX In 640 m V
Gameport 310 mV
Output
Speakers ≥ 6 Ω
Headphones 32 Ω – 1000 Ω
(1) (6 Ω, 1 kHz, 10% THD)
DISC PLAYER
Programmable tracks 99
Frequency response 20 – 20000 Hz, –3 dB
Signal-to-noise ratio ≥ 76 dBA
Channel separation ≥ 60 dB (1 kHz)
MPEG 1 Layer 3 (MP3-CD) MPEG AUDIO
MP3-CD bit rate 32-256 kbps
(128 kbps advised)
Sampling frequencies 32, 44.1, 48 kHz
USB
Frequency response 20 – 20000 Hz, –3 dB
Signal-to-noise ratio ≥ 75 dBA
Channel separation ≥ 40 dB (1 kHz)
Total harmonic distortion < 0.3% (1 kHz)
TUNER
FM wave range 87.5 – 108 MHz
MW wave range 531 – 1602 kHz
Number of presets 40
Antenna
FM 75 Ω wire
AM Loop antenna
Specifications
SPEAKERS
System 3 way, Bass reflex
Impedance 6 Ω
Woofer 1 x 6.5"
Tweeter 1 x 2" Ferrofluid cooled
Dimensions (w x h x d) 348 x 322 x 245 (mm)
Weight 8.7 kg each
GENERAL
Material/finish Polystyrene/Metal
AC Power 220 – 230 V / 50 Hz
Power Consumption
Active 175 W
Standby < 25 W
Eco Power Standby < 1 W
Dimensions (w x h x d) 265 x 322 x 390 (mm)
Weight (without speakers) 8.6 kg
Specifications and external appearance are subject
to change without notice.