EasyManua.ls Logo

Philips FW-M567/25 - Selecting and Deleting Preset Stations; RDS Information and Clock Setting

Philips FW-M567/25
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
English
Selecting a preset radio station
In tuner mode, press í or ë.
The preset number, radio frequency, and
waveband are displayed.
Deleting a preset radio station
Press and hold Ç until PRESET
DELETED is displayed.
The current preset radio station will be
deleted.
All other preset radio stations with higher
numbers are decreased by one.
RDS
RDS (Radio Data System) is a service that
allows FM stations to show additional
information. If you are receiving a RDS station,
RDS and the station name are displayed.
Scrolling through RDS information
Tuned to a RDS radio station from FM band,
then press RDSNEWS repeatedly to select
the following information (if available):
Station name
Programme type (for example: News, Affairs,
Sport, etc.)
Radio text messages
Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1 Tuned to a RDS station from FM band (refer
to “Tuning to radio stations”).
2 Press and hold CLK/TIMER (or
CLOCKTIMER on main unit) until
"SELECT CLOCK OR TIMER" is displayed.
3 Press ë to change the display to "CLOCK"
and press CLK/TIMER (CLOCKTIMER)
again to confirm.
4 Press RDSNEWS.
"SEARCH RDS TIME" is displayed.
When RDS time is read, the current time will
be stored.
If the RDS station does not transmit RDS
time within 90 seconds, "NO RDS TIME" is
displayed.
Note:
Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the transmitting
RDS radio station.
Tuner Operations

Table of Contents

Other manuals for Philips FW-M567/25

Related product manuals