18
English
3139 116 18731
Shuffle
(only on remote control)
In shuffle mode, the system plays all the
available discs and their tracks in random
order. Shuffle may be used also when
tracks are programmed.
To shuffle all the discs and tracks
1 Press SHUFFLE.
™ “SHUFFLE” will be displayed.
™ The SHUFFLE flag, the disc and the
track selected at random appear on
the display.
• The discs and the tracks will be played
in random order until you press Ç.
• If you press REPEAT during shuffling,
the current track or all available discs
will be played repeatedly.
™ “TRACK” or “ALL” will be
displayed.
™ The REPEAT and SHUFFLE flags will be
displayed.
2 Press SHUFFLE again to resume normal
playback.
™ The SHUFFLE flag disappears from the
display.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
Repeat
(only on remote control)
You can play the current track, a disc or all
available discs repeatedly.
1 Press REPEAT on the remote control
during CD playback to select the various
repeat modes.
™ “TRACK”, “DISC”, “ALL” or
“OFF” will be displayed.
™ The REPEAT flag appears on the
display.
• The selected track, selected disc or all
available discs will now be played
repeatedly until you press Ç.
2 Press REPEAT until the "OFF" mode is
displayed to resume normal playback.
™ The REPEAT flag disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffling mode.
– You can also repeat shuffling a program.
™ “REPEAT TRACK“
or
“REPEAT PROGRAM
" will be
displayed.
™
The REPEAT, PROGRAM and SHUFFLE flags
appear on the display.
CD TUNER
INTERACTIVE SOUND STUDIO
TAPECD
PROG
CLOCK/
TIMER
DUB
(HSD)
REC
STANDBY
ON
A.REV
TUNER AUX
PRESET
▲
▲
STOP•CLEARSEARCH • TUNING PLAY • SIDE
MINI HIFI SYSTEM
CD1 • 2 • 3
CDR
BAND
TAPE 1 • 2
M
O
R
E
E
N
T
E
R
J
O
G
M
A
X
S
O
U
N
D
MIC
MIC
LEVEL
V
O
L
U
M
E
SURF
DSC
PERSONAL
DBB
HOLD
STROBE VEC
PAN
SS
LR
C
PRO LOGIC
NEWS!
RDS
DOLBY B
NR
DOLBY B
DNR
NEWS/TA
RDS/
CD TEXT
Note:
– For 'EASY SET' feature, please refer to
page 13.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ “TUNER” will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM, MW or LW.
3 Press TUNING à or á for more than
one second, then release.
™ The display will show “SEARCH”
until a radio station with sufficient
signal strength is found.
• Repeat this procedure until the desired
station is reached.
• To tune to a weak radio station, briefly
press TUNING à or á repeatedly
until the display shows the desired
frequency and/or when the best
reception has been obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
Automatic programming
1 Press TUNER (BAND).
2 Press PROGRAM for more than one
second.
™ The PROGRAM flag starts flashing and
“AUTO” will be displayed.
To Next Page
Loading...
