Functional Overview
Notes:
–First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (
¡
,
O
or
P
for example).
1 SOURCE
– to select the relevant active mode: DISC,
TUNER, TAPE or AUX.
–TUNER: toggles between FM and MW band.
2 DISC MENU (disc mode only)
– to enter or exit the disc contents menu.
3 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
4 5 / 4
– to select movement direction in disc contents
menu/system menu bar.
5 1 / ¡
– to tuner mode, to tune to lower or higher radio
frequency. (1 / ¡)
– in Disc mode, press to fast reverse/forward the
disc.
6 O/ P
– in Disc mode, press to skip to the previous/next
chapter/track.
– in Tuner mode, to select a preset radio station
number
7 PLAY/PAUSE 2;
– to start or interrupt disc playback.
– to resume playback from last stop point.
8 STOP 9
– to stop playing the disc.
9 REPEAT A-B
– to repeat a specific section on a disc.
0 REPEAT
– to select variations of continuous playback.
! SUBTITLE
– to select desired subtitle.
@ AUDIO
– to select the audio channel.
# SLEEP
– to set the sleep timer function.
$ ANGLE
- to select the angles cyclically.
% DIM
– to select different brightness for VFD.
^ DSC
– to select various sound effect.
& POWER 2
– to switch to standby mode.
* Numeric Keypad (0-9)
– to enter a track/title number of the disc.
– to enter a number of preset radio stations.
( VOL +/-
– adjust the volume level.
– adjust key control/ ECHO level in karaoke
mode.
– adjust speakers level in speaker setting mode.
) OK
– to exit or confirm the selection.
¡ GOTO
– to go direct to desired title, chapter or time.
™ PROGRAM
– in disc mode, to program favorite tracks.
– in tuner mode, to program favorite stations.
£ SHUFFLE
– to playback in random mode.
Remote control
ZOOM
DSC
1
&
*
(
)
5
6
¡
£
™
≤
∞
≥
§
•
ª
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
KEY
– to change the tone level to suit your vocal range.
ECHO
– to adjust the echo level in karaoke mode.
§
ZOOM
- to access the Zoom function.
DISPLAY (OSD)
– to view the time, title or chapter information.
•
MUTE
– to interrupt or resume sound reproduction.
ª
DBB
–tosettings to enhance the bass response.
Controls on the system
1 STANDBY ON
- to switch the system on or Standby mode.
2 DISPLAY SCREEN
- to view the current status of the system.
3 DSC
- to select various sound effect:
4 SOURCE
DISC
- to select disc tray.
TUNER
- to select waveband:FM/MW.
AUX
- to select a connected external source:
AUX(auxiliary)
5 38 (PLAY/PAUSE)
for DISC .................... to start or interrupt playback.
6 1 / ¡
for DISC .................... press to search
backward/forward.
for TUNER ------- to tune to a lower or higher
radio frequency.
7 MIC VOL.
– to adjust the mixing level for karaoke or
microphone recording.
8 OPEN.CLOSE
- to open or close the disc tray.
9 MIC IN
- to connect microphone jack.
0 PROGRAM
- for DISC............. to program favorite tracks.
Functional Overview
-for TUNER........ to program favorite stations.
! I2 / 3I
-for DISC..........to skip to the previous/next
chapter/track.
-for TUNER...............to select a preset radio station.
@ STOP 7
for DISC .................... to stop playback or to clear a
programme.
# SENSOR
– point the remote control towards this sensor.
$ VOLUME
– to adjust master volume level.
% DBB
-tosettings to enhance the bass
response.(Dynamic Bass Boost)
^ SUBTITLE
- to select the preferred language for subtitle.
& ;
– to connect headphones.
* AUDIO
- to select the audio channel.
( TAPE DECK
) 3 OPEN
– to open the tape deck door.
¡ DISC TRAY
™ CASSETTE KEY
– to control cassette play.
To Next Page
Loading...
