English
23
Basic Functions
Switching the system on/off
● Press STANDBY-ON B (B on the remote).
➜ The system will switch to the last selected
source.
● Press SOURCE repeatedly (or DISC,
TUNER or AUX on the remote).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY-ON B (B on the remote).
➜ The volume level (up to a maximum volume
level of 12), last selected mode, source and tuner
presets will be retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 30 minutes after a
disc has stopped playing.
Sound Control
● Press SOUND repeatedly to select the desired
sound effect: OPTIMAL, ROCK, JAZZ or
TECHNO during CD/MP3/WMA playback);
HALL, CINEMA or CONCERT during DVD/
VCD playback.
● Press IS/DBB on the system to switch on or off
the surround sound effect or bass enhancement.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
Volume control
Tu rn the VOLUME control on the front panel
clockwise or anticlockwise or press VOL +/- on
the remote to increase or decrease the volume
level.
➜ ”VOLUME XX” is displayed on the display
panel. “XX” denotes the volume level.
To listen through the headphone
● Connect the headphone plug to the n socket
on front panel of the DVD player.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote.
➜ Playback will continue without sound and the
mute icon turns on.
● To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Microphone Mixing
Connect one or two microphones (not
supplied) to the system to sing along with the
music source.
1 Connect one or two microphones to the MIC
1/2 jacks.
● Before connecting the microphone(s), set the
microphone volume to the minimum level to
prevent howling sound by turning the MIC VOL
-/+ knob.
2 During DVD/VCD/CD/MP3 playback, press and
hold KEY/ECHO on the remote to turn on
echo setting.
3 Press VOL -/+ on the remote to select: ECHO
OFF ™ ECHO +1 ™ ECHO +2 ™ ECHO MAX.
4 Start singing or talking through the microphone.
Notes:
–Keep the microphones away from the speakers
to prevent howling.
– During echo or key setting, the system will exit
the setting mode if no karaoke-related button is
pressed within 8 seconds.
Key Control
This feature allows you to change the key tone
of your vocal range.
● Press KEY/ECHO on the remote to turn on
key setting and use VOL -/+ to adjust the key
level up/down (-6 to 06).
To Next Page
Loading...
