15
The fi rst programmed radio station is »
broadcast automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio •
stations.
1 Tune to a radio station.
2 Press PROGRAM to activate program
mode.
[PROG] (program) blinks on the »
display.
3 Press ALBUM/PRESET +/- to allocate a
number (1 to 20) to this radio station,
then press PROGRAM to confi rm.
The preset number and the frequency »
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
To overwrite a programmed station, store another •
station in its place.
Select a preset radio station
1 In tuner mode, press ALBUM/PRESET
+/- to select a preset number.
6 Listen to the
radio
Tune to a radio station
Tip
For optimal FM reception, fully extend and adjust the •
position of the FM antenna.
For optimal MW reception, adjust the position of the •
main unit.
1 Press TUN on the remote control to
select the tuner source.
2 Press TUN to select FM or MW.
3 Press and hold / for more than 2
seconds.
[SEARCH] (search) is displayed. »
The radio tunes to a station with »
strong reception automatically.
4 Repeat step 2 to tune to more stations.
To tune to a weak station, press •
/
repeatedly until you fi nd optimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio •
stations.
1 In tuner mode, press and hold
PROGRAM for 2 seconds to activate
automatic program mode.
[AUTO] (auto) is displayed and begins »
to blink.
All available stations are programmed »
in the order of waveband reception
strength.
English
EN
FWM154_DFU_EN_05.indd Sec1:15FWM154_DFU_EN_05.indd Sec1:15 2009-4-27 15:31:482009-4-27 15:31:48
To Next Page
Loading...
