19
Activate and deactivate alarm timer
1 Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, » disappears on
the display.
To deactivate sleep timer
1 Press SLEEP repeatedly until “SLP OFF” is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The last
selected source is activated to play at a preset
time.
1 Ensure that you have set the clock
correctly.
2 Press and hold TIMER on the remote
control for more than 2 seconds.
The hour digits are displayed and begin »
to blink.
3 Press / to set the hour.
4 Press TIMER to confi rm.
The minute digits are displayed and »
begin to blink.
5 Press / to set the minute.
6 Press TIMER to confi rm.
The timer is set and activated. »
To select a source to activate as the alarm
sound:
1 Press DISC , TUN , AUX , MP3 LINK , or
TAPE to select a source.
For DISC: ensure that there is a disc •
in the disc compartment.
For TUNER: tune to a radio station.•
For AUX/MP3 LINK: ensure that the •
external device is connected and
turned on.
For TAPE: ensure that there is a tape •
in the tape deck and press the
button.
2 Press to switch the unit to standby.
English
EN
FWM154_DFU_EN_05.indd Sec1:19FWM154_DFU_EN_05.indd Sec1:19 2009-4-27 15:31:512009-4-27 15:31:51
To Next Page
Loading...
