24
English
NEWS
You may set up the tuner in such a way that
listening to CD or external source is interrupted
by the NEWS of a RDS station. This only works
if the RDS station broadcasts a NEWS signal
while sending the news.
IMPORTANT!
You can activate NEWS function from
any source mode except TUNER.
Switching on NEWS function
1 In any active mode, press RDS•NEWS until
“NEWS” is displayed.
➜ NEWS is shown.
➜ The system will scan the radio stations stored
in the first five (5) presets and wait for the News
Programme Type data to be available in any of
these RDS stations.
➜ While searching NEWS, the current active
mode remains uninterrupted.
2 When NEWS transmission is detected, the
system will switch to Tuner mode.
➜ NEWS starts flashing.
● If no RDS station is detected in the first five
presets, the system will exit NEWS function.
➜ “NO RDS NEWS” is displayed.
Notes:
–You have to exit Tuner mode before selecting
NEWS function.
– Before you activate the NEWS feature, ensure
that RDS stations are included in the first five
presets.
– The NEWS works only once for each activation.
To cancel NEWS function
● Press RDS•NEWS again or switch the system
to tuner mode.
OR
During news bulletin, press any other available
source keys to execute the relevant source
mode.
Tuner Operations
To Next Page
Loading...
