18
English
EN
9 USB record
external devices are recorded in .mp3 format,
folder called 'PHILIPS' is automatically created
in the USB device. Each time you record to a
a subfolder in the 'PHILIPS' folder. Files and
subfolders are named numerically in the order
in which they are created.
Note
This function is only available for USB 2 PLAY/REC socket.
Record to a USB device
1 Connect a USB device to USB 2 PLAY/
REC socket.
2 Prepare the source to record from.
Disc - Select the disc source and load a
disc. You can select a track from which
a recording starts.
Radio - Tune to a radio station.
MP3 LINK/ PC IN - Select the MP3
link/ PC IN source, and then connect
and start to play an external device.
Karaoke - Singing during karaoke.
3 Press USB RECORD to start recording.
For discs, press USB RECORD
repeatedly to select:
A
current track is recorded.
B [REC ALL] (record all): all tracks/the
remaining tracks are recorded.
» Disc play starts automatically from the
beginning of the disc/the selected track,
and the recording starts.
To stop recording, press
.
Note
If the USB device does not have enough memory to
displayed.
Schedule radio-to-USB
record
Schedule radio recordings in advance and you
can listen to your favorite programs at your
convenience.
Note
A recording is activated only in the standby mode.
The maximum length of a recording is 12 hours.
1 Ensure that you set the clock correctly.
2 Plug a USB device to USB 2 PLAY/REC
socket.
3 Tune to a radio station.
4 Press to switch to standby mode.
5 Press and hold TIMER for more than 2
seconds.
» A prompt to select the source is
displayed.
6 Press TUNER repeatedly to select FM or
AM.
7 Press USB RECORD.
» The start timer digits are displayed and
begin to blink.
8 Press ALB/PRESET+/- to set the hour.
9 Press / to set the minute.
10 Press TIMER
» The end timer digits are displayed and
begin to blink.
11 Press ALB/PRESET+/- to set the hour.
12 Press / to set the minute.
To Next Page
Loading...
