Why does the steam boost function not work properly on my Philips GC3800 Iron?
If the steam boost function on your Philips Iron isn't working correctly and water is leaking from the soleplate, it could be because you've used the steam boost too frequently in a short time or at too low a temperature. Try using the steam boost less often or increasing the temperature setting.
What to do if water leaks from the water filling door of Philips GC3800 Iron?
If water leaks from the water filling door of your Philips Iron, it's likely because the water tank has been overfilled. Avoid filling the tank past the MAX line, and pour out any excess water.
Why does water drip from the soleplate after Philips Iron has been unplugged?
If water drips from the soleplate of your Philips Iron after it's been unplugged or stored, it's probably because the iron was stored horizontally with water still in the tank.
Detailed identification of all parts of the Philips iron, including nozzle, buttons, and controls.
Advises reading important information leaflet and user manual before use for future reference.
Instructions on how to fill the water tank with tap water up to the maximum level.
Guide on setting the correct temperature and steam for different fabric types using the dial and slider.
Instructions on using the spray button to moisten clothes and remove stubborn creases.
How to use the steam boost trigger for a powerful burst of steam to remove stubborn creases.
Guidance on pressing and holding the steam boost trigger for additional steam during ironing.
Using the steam boost function in a vertical position to remove creases from hanging items.
How to select ECO setting for energy saving or dry setting for ironing without steam.
Steps to clean the iron and its soleplate using a damp cloth and mild cleaning agent.
Guide on using the calc-clean function monthly to remove scale and prolong iron life.
To Next Page
General