EasyManua.ls Logo

Philips GC4518/30 - User Manual

Philips GC4518/30
18 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2016 Koninklijke Philips N.V.
All rights reserved.
4239 001 04511
1
a
b
d
g
f
e
h
c
a
b
c
GC4500 series
User manual
Mode d’emploi
Manuale utente
Manual del usuario

Table of Contents

Questions and Answers

  • K
    kcollierAug 12, 2025
    Why does my Philips GC4518/30 Iron leak when using the steam boost?
    • T
      tfletcherAug 12, 2025
      If your Philips Iron leaks water when using the steam boost function, it could be due to several reasons. First, ensure that the steam slider is not set to MAX or ECO; instead, set an ironing temperature within the range where the steam boost function is effective (between the indicated setting and MAX). Also, avoid using the steam boost function repeatedly in quick succession; allow a few seconds between uses. Finally, make sure you're using the steam boost at a sufficiently high temperature, again, within the range between the indicated setting and MAX.
  • B
    blairnicholasAug 21, 2025
    What to do if flakes come out of my Philips GC4518/30 Iron during ironing?
    • G
      Gary ChristianAug 21, 2025
      If you notice flakes and impurities coming out of the soleplate of your Philips Iron while ironing, this indicates that calc has formed inside the soleplate. To resolve this, use the calc clean function as described in the ‘Cleaning and maintenance’ section under ‘Calc clean function’.
  • M
    Mario CarlsonAug 31, 2025
    Why is my Philips GC4518/30 Iron dripping water after I unplug it?
    • P
      Paula MoraSep 1, 2025
      If water drips from the soleplate of your Philips Iron after it has been unplugged or stored, set the steam slider to the dry setting. This should prevent further dripping.

Philips GC4518/30 Specifications

General IconGeneral
BrandPhilips
ModelGC4518/30
CategoryIron
LanguageEnglish

Related product manuals