EasyManua.ls Logo

Philips GC4506/21 - User Manual

Philips GC4506/21
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
© 2016 Koninklijke Philips N.V.
All rights reserved.
4239 001 04521
1
a
b
d
g
f
e
h
c
a
b
c
GC4500 series
User manual
사용 설명서

使用手冊
用户手册

Questions and Answers

  • A
    alec87Aug 17, 2025
    What to do if water leaks from the back of Philips GC4506/21?
    • Z
      Zachary GillAug 17, 2025
      If water or steam is leaking from the back part of your Philips Iron, it's likely because you haven't properly locked the Quick Calc release tray. To fix this, take out the Quick Calc Release tray and clean it with tap water. Wipe off any calc in the opening at the back of the iron with a cloth. Then, put the tray back in and lock it securely.
  • M
    Michael FoxAug 19, 2025
    Why does my Philips GC4506/21 Iron leak when using the steam boost?
    • D
      Daniel WagnerAug 20, 2025
      If your Philips Iron leaks water when using the steam boost function, it could be due to several reasons. First, ensure that the steam slider is not set to MAX or ECO; instead, set an ironing temperature within the range where the steam boost function is effective (between the indicated setting and MAX). Also, avoid using the steam boost function repeatedly in quick succession; allow a few seconds between uses. Finally, make sure you're using the steam boost at a sufficiently high temperature, again, within the range between the indicated setting and MAX.
  • R
    Ronald DoyleAug 23, 2025
    Why does the steam boost function not work properly on my Philips Iron?
    • A
      Alex HarrisAug 23, 2025
      If the steam boost function on your Philips Iron isn't working well and water is leaking, it could be due to using the steam boost too frequently in a short time. Try waiting a few seconds between each steam boost. Also, make sure you're using the steam boost at a suitable temperature setting, specifically between the '???' and MAX settings.
  • S
    Sonia HammondAug 26, 2025
    How to stop water from leaking from the Philips GC4506/21 filling door?
    • J
      Jessica BairdAug 26, 2025
      If water is leaking from the water filling door of your Philips Iron, it's likely because the water tank has been overfilled. Avoid filling the tank past the MAX level. If it is overfilled, pour out any excess water.
  • J
    Jeffrey BlackburnAug 28, 2025
    Why does my Philips GC4506/21 leak when using steam boost?
    • B
      Brent HansenAug 28, 2025
      If the steam boost function of your Philips Iron isn't working properly and water is leaking from the soleplate, it could be due to a couple of reasons: 1. You might be using the steam boost function too frequently in a short period. If this is the case, wait a few seconds before using the steam boost function again. 2. You might be using the steam boost function at too low a temperature. Make sure to set the ironing temperature to the recommended level (??? to MAX) for steam boost.
  • T
    tjenkinsAug 31, 2025
    What to do if Philips GC4506/21 drips water after being stored?
    • J
      Joseph ParkerAug 31, 2025
      If water is dripping from the soleplate of your Philips Iron after it has been unplugged or stored, it is probably because you left water in the tank and stored the iron horizontally. Make sure to empty the water tank after each use.
  • M
    mbeanSep 2, 2025
    How to stop Philips GC4506/21 from leaking when filling?
    • J
      Jean ThomasSep 2, 2025
      If water is leaking from the water filling door of your Philips Iron, it means you have likely overfilled the water tank. Avoid filling the tank beyond the MAX indication. If you have overfilled it, pour the excess water out.
  • B
    Barbara WilliamsSep 5, 2025
    What to do if flakes come out of the soleplate of my Philips GC4506/21?
    • M
      Mr. Gregory VasquezSep 5, 2025
      If you notice flakes or impurities coming from the soleplate of your Philips Iron while ironing, it's likely due to calc buildup inside the soleplate. To resolve this, use the calc clean function as described in the ‘Cleaning and maintenance’ chapter, section ‘Calc clean function’.
  • P
    Paul MoraSep 8, 2025
    Why are flakes coming out of my Philips Iron?
    • Y
      youngkaylaSep 8, 2025
      If flakes and impurities are coming out of the soleplate of your Philips Iron during ironing, this is likely due to calc formation inside the soleplate. You should use the Calc-Clean function to resolve this issue.
  • S
    Stephanie StewartSep 12, 2025
    What to do if flakes come out of my Philips GC4506/21 Iron during ironing?
    • A
      Alejandra SpencerSep 12, 2025
      If you notice flakes and impurities coming out of the soleplate of your Philips Iron while ironing, this indicates that calc has formed inside the soleplate. To resolve this, use the calc clean function as described in the ‘Cleaning and maintenance’ section under ‘Calc clean function’.

Philips GC4506/21 Specifications

General IconGeneral
Power2400 W
Water tank capacity300 ml
Cord length2 m
Vertical steam functionYes
Calc clean functionYes
Drip stop functionYes
Auto Shut-offYes
Self-CleaningYes
Anti-CalcYes

Related product manuals