What to do if water leaks from the back of Philips GC4527/03?
If water or steam is leaking from the back part of your Philips Iron, it's likely because you haven't properly locked the Quick Calc release tray. To fix this, take out the Quick Calc Release tray and clean it with tap water. Wipe off any calc in the opening at the back of the iron with a cloth. Then, put the tray back in and lock it securely.
Why does my Philips GC4527/03 Iron leak when using the steam boost?
If your Philips Iron leaks water when using the steam boost function, it could be due to several reasons. First, ensure that the steam slider is not set to MAX or ECO; instead, set an ironing temperature within the range where the steam boost function is effective (between the indicated setting and MAX). Also, avoid using the steam boost function repeatedly in quick succession; allow a few seconds between uses. Finally, make sure you're using the steam boost at a sufficiently high temperature, again, within the range between the indicated setting and MAX.
General| Power | 2400 W |
|---|---|
| Steam Output | 45 g/min |
| Steam Boost | 200 g |
| Water Tank Capacity | 300 ml |
| Cord Length | 2 m |
| Vertical Steam | Yes |
| Drip Stop | Yes |
| Calc Clean Solution | Yes |
| Self-Cleaning | Yes |
| Anti-Calc System | Yes |
| Auto Shut-Off | Yes |
To Next Page
