8
Warning: Never leave the appliance unattended when it is connected to the mains. Always unplug
the appliance after use.
Cleaning and maintenance
SmartCalc-CleanSystem
is done regularly. This helps to maintain a strong steam performance and prevents dirt and stains coming
reminders.
SoundandlightCalc-Cleanreminder
that you have to perform the Calc-Clean process (Fig. 10).
Fig. 11
This takes place regardless of the type of water used.
activated yet.
PerformingtheCalc-CleanprocesswiththeCalc-Cleancontainer
Warning: Do not leave the appliance unattended during the Calc-Clean process.
Caution: Always perform the Calc-Clean process with the Calc-Clean container. Do not interrupt the
process by lifting the iron up from the Calc-Clean container, as hot water and steam will come out of
the soleplate.
1 Fill up the water tank halfway (Fig. 12).
Note: Make sure that the appliance is plugged in and switched ON during the Calc-Clean process.
2 Fig. 13).
3 Fig. 14).
4 ).
Calc-Clean process. It is perfectly safe to rest the iron on this container during the entire process.
5 Fig. 16).
6 Wait approximately 2 minutes for the appliance to complete the process (Fig. 17). When the Calc-Clean
7 Fig. 18).
Caution: The iron is hot.
8
Fig. 19).
9
start the Calc-Clean process.
accumulated inside the iron. This is normal.
http://www.philips.com/descaling-iron.
English
7 / 160
To Next Page
Loading...
Need help?
General