9
Cleaningthesoleplate
1 Clean the appliance with a moist cloth.
2
(Fig. 20).
Tip: Clean the soleplate regularly to ensure smooth gliding.
Storage
1
2 Pour the water out of the water tank into the sink (Fig. 21).
3 Fold the mains cord and water supply hose together. Push them into the storage compartment (Fig. 22).
4
platform (Fig. 24).
Troubleshooting
www.philips.com/support for a list of
frequently asked questions or contact the Consumer Care Center in your country.
Problem Possible cause Solution
The iron does not produce
any steam.
There is not enough water in
the water tank.
indication. Press and hold the steam trigger
until steam comes out. It may take up to 30
seconds until steam comes out.
You did not press the steam
trigger.
Press and hold the steam trigger until
steam comes out.
The steam function has
performed the Calc-Clean
process.
Perform the Calc-Clean process to restore
the steam function. (see chapter ' Cleaning
and maintenance')
At the start of your ironing
Press and hold the steam trigger until
steam comes out. It may take up to 30
seconds until steam comes out.
You have set the temperature
dial to ●.
●. To use the
●● or
higher.
The light of the CALC-
This is the Calc-Clean reminder. Perform the Calc-Clean after the Calc-Clean
reminder is given (see chapter ‘Cleaning
and maintenance’).
No steam comes out of
You have not done or have
not completed the Calc-Clean
process.
the steam function again (see chapter
‘Cleaning and maintenance’).
English
8 / 160
To Next Page
Loading...
Need help?
General