Do you have a question about the Philips GC7800 series and is the answer not in the manual?
Model | GC7800 series |
---|---|
Power | 2400 W |
Heating Time | 2 min |
Soleplate | SteamGlide soleplate |
OptimalTEMP technology | Yes |
Vertical Steam | Yes |
Calc Clean Reminder | Yes |
Safety Auto Shut-off | Yes |
Auto Shut-off | Yes |
SteamGlide soleplate | Yes |
Type | Iron |
Anti-calc System | Yes |
Welcome and overview of the product manual for the Philips GC7800 series iron.
Lists and identifies all parts of the steam generator and iron based on Fig. 1.
Details OptimalTemp and ProVelocity technologies for efficient and safe ironing.
Recommends water type for appliance longevity and performance, especially in hard water areas.
Step-by-step guide to filling the water tank before and during use.
Identifies fabrics suitable and unsuitable for ironing with the appliance.
Instructions for operating the steam generator for effective ironing.
How to use the steam boost function to remove stubborn creases effectively.
Instructions for ironing hanging fabrics in a vertical position.
Safe placement of the hot iron when not in use to protect surfaces.
Details on Eco mode and auto-off function for energy conservation.
Overview of the descaling and cleaning system for maintaining performance.
Explains the sound and light reminders for performing the descaling process.
Step-by-step instructions for the descaling process using the Calc-Clean container.
How to clean the iron's soleplate for optimal gliding and performance.
Instructions for safely storing the steam generator and iron after use.
Solutions for when the iron fails to produce steam.
Explains Calc-Clean light issues, reminders, and required actions.
Covers auto-off function, loud pumping sounds, and appliance status.
Solutions for water droplets, impurities, flushing, and ironing imprints.
Troubleshooting for when the Calc-Clean process does not start.
Solutions for a wet ironing board cover or water droplets on the floor.