10 English
Problem Possible cause Solution
Dirty water and impurities
come out of the soleplate.
Impurities or chemicals present
in the water have deposited
in the steam vents and/or
soleplate.
Perform the Calc-Clean process regularly
(see chapter ‘Cleaning and maintenance’).
Water ushes out of the
soleplate.
You have accidentally started
the Calc-Clean process
(see chapter ‘Cleaning and
maintenance’).
Switch o the appliance. Then switch it
back on again. Let the iron heat up until
the ‘iron ready’ light lights up steadily.
The Calc-Clean process
does not start.
You have not pressed the CALC-
CLEAN button for 2seconds
until the appliance started
beeping.
See chapter ‘Cleaning and maintenance’.
To Next Page
Loading...
