1 Hold the iron in vertical position and press the steam trigger to
steam iron hanging curtains and clothes (jackets, suits, coats).
A powerful shot of steam helps to remove stubborn creases.
1 Set the temperature dial to a position between 3 and MAX.
2 Press the shot-of-steam button.
Note: Use the shot-of-steam function intermittently. If water droplets come out
of the soleplate, let the iron heat up for at least one minute before you use the
shot-of-steam function again.
Ironing without steam
There are one or two ways to iron without steam:
All types: Simply start ironing without pressing the steam trigger.
GC8261/GC8260/GC8225/GC8220 only: Select steam setting a (no
steam) and start ironing.
Tips
When you steam iron woollen fabrics, shiny patches may occur. To
prevent this, use a dry pressing cloth or turn the article inside out and
iron the reverse side.
Silk, woollen and synthetic materials: iron the reverse side of the fabric
to prevent shiny patches.
Iron velvet and other fabrics that tend to acquire shiny patches in one
direction only (along with the nap) while you apply very little pressure.
Do not use steam when you iron coloured silk. This could cause stains.
-
-
-
-
-
-
ENGLISH 11
To Next Page
Loading...
Need help?
Power
Water Tank
Weight and Dimensions
