Need help?Do you have a question about the Philips GC8600 Series and is the answer not in the manual?
General| Power | 2400 W |
|---|---|
| Steam output | 120 g/min |
| Heating time | 2 min |
| SteamGlide soleplate | Yes |
| OptimalTEMP technology | Yes |
| Vertical steam | Yes |
| Calc clean solution | Yes |
| Safety auto off | Yes |
| Cord storage | Yes |
| Auto Shut-off | Yes |
| Self-Cleaning | Yes |
| Anti-Calc System | Yes |
| Cord length | 1.8 m |
Never immerse the iron or the steam generator in water.
Check voltage, use only if undamaged, replace damaged cords, never leave unattended.
Connect to earthed socket, use on stable surface, check cords, unwind cord, avoid touching hot parts.
Fill the water tank before every use when the water level is low or the 'water tank empty' light flashes.
Connect the plug to an earthed socket and press the on/off button to switch on the steam generator.
Press the carry lock release button to unlock the iron from the iron platform.
OptimalTemp technology allows ironing all fabrics without adjusting temperature or steam settings.
Unfold ironing board, place garment, and start ironing when 'iron ready' light is steady. Includes steam trigger use.
Press steam trigger twice quickly for high continuous steam output, improving ironing experience.
Remove wrinkles from hanging clothes by steaming vertically, touching garment lightly with soleplate.
Place the iron on the iron platform or horizontally on the ironing board when not in use.
Use ECO mode to save energy; press button to activate/deactivate.
Tips for minimizing wrinkles during drying and best practices for ironing shirts, collars, and buttons.
Appliance automatically switches off after 10 minutes of inactivity to save energy.
Clean the appliance with a moist cloth; heat soleplate and move over a moist cloth to remove stains.
Perform descaling when EASY DE-CALC light flashes. Follow procedure before next use.
Cool down for 2 hours, remove EASY DE-CALC knob, let water with scale flow into cup, reinsert knob.
Clean soleplate with damp cloth. Fill tank with distilled water, switch on, wait 5 mins, iron thick cloth for 3 mins.
Let the steam generator cool down for 2 hours after descaling. Remove EASY DE-CALC knob to drain water.
Switch off the appliance, remove the plug from the wall socket, and pour out water.
Pour out water, lock iron, fold supply hose, store hose in compartment, fold and fasten mains cord.
Carry the steam generator with both hands or by the handle and supporting the bottom.
Addresses water droplets from soleplate, steam/water escape from DE-CALC knob, and iron shine/imprints.
Covers steam generator switching off, not producing steam, or making pumping sounds.
To Next Page
