Philips GC8600 Series - Before First Use; Using Your Steam Generator; Filling the Water Tank


This steam generator is intended for ironing and refreshing
fabrics only.
Remove all packaging material and stickers.
Remove the protective cover from the soleplate before you
use the steam generator.
Always place the steam generator on a stable and horizontal
surface.
Fill the water tank before every use (see chapter ‘Using your
steam generator’, section ‘Filling the water tank’).
Using your steam generator

Fill the water tank before every use, when the water level in
the water tank drops below the minimum level or when the
‘water tank empty’ light ashes quickly.
1 Openthellingfunnellid.
2 Fill the water tank with tap water up to the MAX
indication.
3 Properlyclosethellingfunnellid(‘click’).
Donotputhotwater,perfume,vinegar,starch,descaling
agents, ironing aids or other chemicals in the water tank, as
theappliancehasnotbeendesignedforthis.
Note: Do not tilt or shake the steam tank when the water tank is
full, otherwise water may escape from under the lling funnel lid.
ENGLISH 9