To Next PageTo Next Page
Need help?Do you have a question about the Philips PerfectCare Aqua GC8635 and is the answer not in the manual?
General| Iron power | - W |
|---|---|
| Product color | Blue, White |
| Soleplate type | - |
| Water tank capacity | 2.2 L |
| Maximum steam pressure | 5 bar |
| Steam boost performance | 220 g/min |
| Vertical steam function | Yes |
| Continuous steam performance | 120 g/min |
| Power | 2400 W |
| Cord length | 1.8 m |
Weight and Dimensions| Depth | 270 mm |
|---|---|
| Width | 362 mm |
| Height | 263 mm |
| Weight | 4500 g |
Details on soleplate, temperature, steam output, and power for efficient ironing.
Highlights water tank, heat-up time, safety auto-off, storage, and cord length.
Information on water suitability and calc clean solution for maintenance.
Compliance with interference suppression and post-repair safety requirements.
Details on voltage, frequency, power, dimensions, and weight of the appliance.
Guidance on water usage and features of the SteamGlide soleplate.
Explanation of the technology ensuring perfect settings for all fabrics.
Information on testing and approval by independent textile experts.
Details on steam pressure for ironing speed and water tank capacity for extended use.
Highlights for secure iron locking and easy scale removal (Easy De-Calc).
Lists parts 1 through 9 for disassembling the iron, including caps, reflectors, and switches.
Lists parts 10 through 16 for disassembling the iron, including rings, housings, and the soleplate.
Details for iron parts 1 through 9, including service codes and descriptions.
Details for iron parts 10 through 16, including service codes and descriptions.
Diagram illustrating the exploded view of the iron and its numbered components.
Lists parts 17 through 23 for disassembling the stand, including doors, tanks, and locks.
Lists parts 24 through 36 for disassembling the stand, including caps, valves, and boilers.
Lists parts 37 through 41 for disassembling the stand, including buttons, cords, and bases.
Details for stand parts 17 through 23, including service codes and descriptions.
Details for stand parts 24 through 36, including service codes and descriptions.
Details for stand parts 37 through 41, including service codes and descriptions.
Diagram illustrating the exploded view of the stand's lower components and parts.
Diagram illustrating the exploded view of the stand's upper components and parts.
Schematic showing wiring paths for the pump, thermistor, E-valve, and boiler.
Schematic showing wiring paths for the iron's heater, thermistor, and micro-switch.
Instructions for replacing specific cord sets, microswitch, and valve assemblies.
Warning against using corrosive chemicals like vinegar for boiler cleaning.
Guidance on applying loctite for good sealing during valve or pump replacement.
Common checks including soleplate temperature, leakage current, and functionality.
