Philips PerfectCare Pure PSG User Manual

Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Service Manual
Philips Consumer Lifestyle
PerfectCare Pure PSG
GC7620
13/07
PRODUCT INFORMATION
Fast & powerful crease removal
• Soleplate: T-ionicGlide
• OptimalTemp Technology
• Steam output
• Vertical steam
• Steam pressure: Up to 5 bar
• Steam tip
• Power: 2400 W
• Steam boost: 220 g
• Continuous steam output: 120 g/min
Easy to use
• Water tank capacity: 1500 ml
• Filling and emptying water: Extra large filling hole
• Refill any time
• Heat-up time: 2 min
• Hose storage: Hose storage compartment
• Cord storage: Cord clip
• Hose length: 1.6 m
• Safe for all fabrics: Even for delicates like silks
• Power cord length: 1.8 m
Sustainability
• ECO setting: 30% energy reduction
Calc management
• Calc clean solution: Demineralized water
Safety Information
• This product meets the requirements regarding interference
suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements and legal
regulations as officially laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power : 2800 W
Dimension (F-box) : 400 (L) x 230 (W) x 280 (H) mm
Weight of iron : 1.20 kg
Demineralized water only
PerfectCare Pure is designed to be used only with demineralized
or distilled water. Demineralized or distilled water prevent your
appliance form scale damage, your appliance will deliver powerful
and clean steam for very long. Tap water filtered by the Philips
IronCare filtering jug works perfectly well. The product should
not be used with tap water, perfumed water nor Brita filtered
water.
Compact and light
The compact design makes your appliance easy to storage. Space
will never be an issue again! As it is very light, your appliance is
easy to carry. Its light weight iron will make your ironing much
more comfortable.
OptimalTemp Technology
OptimalTemp Technology from the PerfectCare steam generator
always delivers one perfect setting for all your clothes thanks to:
- Advanced Smart Control Processor
- Centrifugal steam chamber.
Tested and approved by experts
Tested and approved by independent textile experts institutes.

Philips PerfectCare Pure PSG Specifications

General

Power	2400 W
Cord length	1.8 m
Vertical steam function	Yes
Calc clean reminder	Yes
Auto shut-off	Yes
Anti-calc system	Yes
Heat up time	2 min

Summary

Product Overview and Features

Fast & Powerful Crease Removal

Key features for efficient ironing, including soleplate type, steam output, and pressure.

Easy to Use Features

Convenience aspects like water tank capacity, filling, heat-up time, and cord management.

Sustainability and Calc Management

Eco-setting for energy reduction and calc cleaning using demineralized water.

Safety Information

Compliance with regulations and post-repair safety requirements.

Technical Specifications and Technology

Electrical and Physical Data

Details voltage, frequency, power, dimensions, and weight.

Water Usage and Maintenance

Specifies demineralized water use and calc management.

Optimal Temp Technology

Explains the technology for a single perfect setting for all clothes.

Design and Expert Approval

Highlights compact design, lightweight build, and expert testing.

Iron Disassembly Steps

Inlay and Iron PCBA Removal

Steps to remove the inlay and the iron printed circuit board assembly.

Trigger, Chassis, and Housing Removal

Procedures for removing the trigger, chassis, and housing with light ring.

Dosing Head and LED Assy Removal

Instructions for detaching the dosing head and LED assembly.

Hose Cord, Cover, and Soleplate Removal

Steps for removing hose cord, cover, and soleplate assembly.

Iron Parts List

Component Identification

Lists parts with their position, service code, and description for the iron.

Stand Disassembly Steps

Tray Cap and Rubber Parts Removal

Steps for removing the tray cap, front rubber, and rubber tray.

Tray, Cartridge Lid, and Stand Bottom Removal

Procedures for removing tray, cartridge lid, stand bottom, and its cap.

Water Tank and Filling Door Removal

Instructions for detaching the water tank assembly and filling door.

Power Board, Pump, and Cord Removal

Steps for removing power board, pump assembly, and power cord.

Stand Parts List

Component Identification

Lists stand parts with their position, service code, and description.

Wiring Diagram

Iron Wiring Connections

Details the electrical connections within the iron unit.

Stand Wiring Connections

Details the electrical connections within the stand unit.

Repair and Testing Procedures

Soleplate Temperature Check

Verifies soleplate temperature against IEC requirements.

Leakage Current Measurement

Measures leakage current to ensure it's below the IEC specified limit.

Water Leakage and Functionality Test

Checks for water leaks and verifies product functions like steaming.

Component Checks

Covers checks for loose parts, fuses, ESD control for PCBs, and screw specifications.

Specific Cleaning and Repair

Pump Restrictor Cleaning

Procedure for cleaning the pump restrictor if the pump is not pumping water.

Cartridge Compartment Cleaning

Steps to clean the cartridge compartment, including residue on the mesh.