Philips GC8600 Series - Auto-Off Mode (Specific Types Only); Cleaning and Maintenance; General Cleaning; Descaling


- To save energy, the steam generator switches off
automatically when it has not been used for 10 minutes.
- To reactivate the steam generator, press the on/off button.
The steam generator starts to heat up again.

To properly maintain your appliance, clean the iron and the
steam generator regularly.
1 Clean the appliance with a moist cloth.
2 Toeasilyandeffectivelyremovestains,letthesoleplate
heatupandmovetheironoveramoistcloth.
Tip: Clean the soleplate regularly to ensure smooth gliding.
IMPORTANT - DESCALING
It 


The EASY DE-CALC light ashes after about a month or 10
ironing sessions to indicate that the steam generator needs
to be descaled. Perform the following descaling procedure
before you use the steam generator again.
1 Presstheon/offbuttontoswitchoffthesteam
generator.
2 Removetheplugfromthewallsocket.
ENGLISH 15