Problem Possible cause Solution
The steam generator is
not switched on.
Insert the plug in the wall socket and
press the on/off button to switch on
the steam generator.
The steam
generator has
switched off.
The auto-off function is
activated automatically
when the steam genera-
tor has not been used for
more than 10 minutes.
Press the power on/off button to
switch on the steam generator again.
The steam
generator pro-
duces a pump-
ing sound.
Water is pumped into the
boiler. This is normal.
If the pumping sound continues non-
stop, switch off the steam generator
and remove the plug from the wall
socket. Contact an authorised Philips
service centre.
ENGLISH22
To Next Page
Loading...
