To Next PageTo Next Page
Need help?Do you have a question about the Philips GC9540 and is the answer not in the manual?
General| Power | 2400 W |
|---|---|
| Steam output | 120 g/min |
| Steam boost | Up to 450 g |
| Water tank capacity | 1.8 L |
| Heating time | 2 min |
| Continuous steam | 120 g/min |
| Soleplate | SteamGlide |
| SteamGlide soleplate | Yes |
| OptimalTEMP technology | Yes |
| Vertical steam | Yes |
| Calc clean solution | Yes |
| Safety auto shut-off | Yes |
| Cord storage | Yes |
| Auto Shut-off | Yes |
| Self-Cleaning | Yes |
| Cord Length | 1.8 m |
Details user convenience features like detachable water tank, quick heat-up, and cord storage.
Focuses on eco-friendly design, including ECO setting for 20% energy reduction.
Information on water suitability and cleaning solutions, such as Easy De-calc.
Ensures perfect steam and temperature, safe and effective on all garments.
Facilitates hassle-free scale removal for extended appliance life.
Provides secure locking of the iron for convenient and safe transportation.
Instructions for removing and disassembling the backplate assembly.
Guidance on safely removing the SOS knob cover using a sharp object.
Sequential steps for disassembling various iron components like SOS knob, inlay, and micro-switch.
Lists part numbers and descriptions for soleplate and thermistor assemblies.
Details braided rubber hose, hose clips, and associated parts.
Components including housing, light guide, micro-switch, and SOS knob parts.
Lists trigger, trigger spring, and backplate screw cap parts.
Diagram showing exploded view of iron parts with numerical and alphabetical labels.
Highlights specific parts like Micro Switch holder, cord clamp, and rubber gasket.
Instructions for removing the water tank and tray molded components.
Steps for disassembling power cord storage and rinse cap assemblies.
Procedure for removing boiler assembly and button panel.
Guidance on removing power board PCB and floating platform assemblies.
Lists parts for stand bottom, pump, and de-air valve.
Details boiler assembly, electrovalve, and thermistor for the boiler.
Includes braided rubber hose, inox clamps, and various spacer components.
Lists parts for water tank, rinse cap, and associated fittings.
Includes button panel, front lock, power board PCB, and floating platform.
Detailed exploded view of the steam generator stand with numbered parts.
Highlights specific stand components like water tank, boiler, and control panels.
