Philips GC9550 Service Manual

Service Manual
Philips Consumer Lifestyle
Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification
Steam Generator
GC9550
12/01
PRODUCT INFORMATION
Fast & powerful crease removal
- Soleplate: SteamGlide
- OptimalTemp
- Continiuous steam output: 120 g/min
- Steam boost: 290 g/min
- Vertical steam
- Steam pressure: Up to 6.0 bar
- Steam tip
- Power: 2400 W
Easy to use
- Water tank capacity: 1500 ml
- Filling and emptying water: Detachable water tank
Extra large opening door
- Refill any time
- Heat-up time: 2 min
- Auto Off
- Hose storage: Hose storage compartment
- Cord storage: Cord storage compartment
- Power cord lenght: 1.8 m
- Cord freedom (swivel): 180 degree cord freedom
- Hose length: 1.7 m
- Safe for all fabrics: Even for delicates like silks
- Carry Lock
Sustainability
- ECO setting: 20% energy reduction
Calc management
- Suitable for tap water
- Calc clean solution: Easy De-calc
EMF & Service Information
- This product meets the requirements regarding interference
suppression on radio & TV.
- After the product has been repaired, it should function
properly & has to meet the safety requirements as officially
laid down at this moment.
TECHNICAL INFORMATION
Voltage : 220 - 240 V
Frequency : 50 - 60 Hz
Power - Iron : 800 W at 230 V
- Boiler : 1370 W at 230 V
Product Dimensions : 28.3 x 26.3 x 42.4 cm
Weight : Weight of iron: 1.2 kg
Weight of iron + base: 5.4 kg
Optimal Temp technology
- Delivers always perfect combination of steam and
temperature
- 100% easy to use, no adjustment required
- 100% safe on all ironable garments
- 100% effective on all fabrics, no other iron is faster
- Tested and approved by independent textile experts
Always the perfect setting thanks to:
1 - Cylonic ste am chamber
2 - Advanced Smart control processor
Easy De-calc
Easy De-calc cap allows hassle free & effective scale removal
to extend the life of the steam generator.
Carry Lock
Lock your iron securely & carry your appliance easy.
1
2

Philips GC9550 Specifications

General

Brand	Philips
Model	GC9550
Category	Iron
Language	English

Summary

Product Information

Performance Features

Details on steam output, pressure, and tip for crease removal.

Ease of Use

Information on water tank capacity, filling, heat-up time, and storage.

Sustainability & Calc Management

Covers ECO setting, tap water use, and descaling methods.

Technical Information

Optimal Temp Technology

Explains the combination of steam and temperature for perfect results.

Easy De-calc & Carry Lock

Describes hassle-free scale removal and secure appliance carrying.

Service & Safety Information

EMF & Service Compliance

Details interference suppression and post-repair safety requirements.

Iron Disassembly Advice

Backplate and Knob Assembly

Steps for disassembling the backplate and SOS knob.

Internal Component Removal

Instructions for removing micro-switch, housing, light guide, and deviator.

Cover and Soleplate Removal

Steps for disassembling molded covers and soleplate.

Parts List - Iron

Iron Components

List of all iron parts with service codes and descriptions.

Exploded View - Iron

Iron Component Identification

Diagram showing numbered parts of the iron for reference.

Stand Disassembly Advice

Water Tank & Tray Assembly Removal

Steps for disassembling water tank and tray components.

Housing & Panel Component Removal

Instructions for removing housing, display, button panels, and covers.

Boiler & Electrical Component Removal

Steps for disassembling boiler, power board, and platform.

Parts List - Stand

Stand Components

List of all stand parts with service codes and descriptions.

Exploded View - Stand

Stand Component Identification

Diagram showing numbered parts of the stand for reference.

Electrical Block Diagram

System Components and Connections

Overview of electrical components in the stand and iron.

Wiring Diagram

Detailed Wiring Connections

Diagram showing specific wire connections between components.

Repair Instructions

Soleplate Temperature Check

Procedure to measure soleplate temperature against requirements.

Leakage Current Test

Procedure to measure earth leakage current as per IEC requirement.

Water Leakage & Functionality Check

Verifies no water leaks and proper product functionality.

Loose Part Check

Ensures no loose parts are left after repair.

Crimping Instructions

Inox Clamp Crimping

Guidelines for correctly crimping the inox clamp on hoses.

Electrovalve Replacement Precautions

Torque Wrench Usage

Precautions for using a torque wrench when replacing the electrovalve.