Philips GoPure GP5212 - Using GoPure car air purifier functions; Philips GoPure car air purifier-How filter works; How to replace the filter

8
9
4 Using GoPure car air purier functions
2 Touch the power button to switch the speed mode in sequence of auto,
boost and silent. The power button will emit a sound while being pressed.
1 To turn on the device, touch the power button, the device will start running
in auto mode with emitting a sound.
When the vehicle power supply is on, the device starts automatically in auto mode.
3 To turn o the device, hold down the power button for 2s until it emits
a sound.
Understanding air quality indicatorr
The air quality indicatorr shows the air quality inside your car at all times.
Red Unhealthy air quality
Yellow Fair air quality
Blue Good air quality
Replace lter
2s
After the device is turned on, lter replacement
reminder indicator will ash red.
>80 ug/m
3
41-80 ug/m
3
0-40 ug/m
3
5 Philips GoPure car air purier-How lter works
Philips GoPure Car air purier is
composed of a multi-layer ltration
system that guarantees the most
eective air-purication. All lter
layers are assembled in one single
simple-to-replace lter.
m Important
Philips GoPure car air purier
indicates automatically when you
must change the lters.
When the lter needs to be
replaced, the lter replacement
indicator will ash red for 30
seconds then remain red each time
the device is turned on.
Replace the lter immediately
using only genuine Philips GoPure
SelectFilter Plus.
It helps maintain the maximal
performance of your GoPure Car
air purier and helps to provide the
purest air quality inside your car.
5.1 How to replace the lter
1 Disconnect GoPure car air
purier device.