Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic elds.
General
- The appliance is equipped with an automatic voltage selector and is
suitable for mains voltages from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe low voltage of less
than 24 volts.
- Maximum noise level: Lc = 75dB(A)
Charging
Charge the appliance fully before you use it for the rst time or after
a long period of disuse.
When it is charged for 1 hour, the appliance has a cordless operating
time of up to 120 minutes.
Note: After charging the appliance fully for the rst time, you can also use the
appliance directly from the mains. Simply connect the appliance to the mains.
Charging indications
Battery low indication
- When the battery is almost empty, the charging light starts to
ash orange.
Charging
- When the appliance is charging, the charging light ashes red.
Battery fully charged
- When the battery is fully charged, the charging light lights up
red continuously.
Note: After 30 minutes, the charging light switches off automatically.
Charging the appliance
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance.
3 Put the adapter in the wall socket.
4 After charging, remove the adapter from the wall socket and
pull the small plug out of the appliance.
ENGLISH 7
8 / 138
To Next Page
Loading...
