HD5720/30
10-23
Temperature measurement.
COFFEE TEMPERATURE MEASUREMENT PROCEDURE
MENU OK
OFF
ON
1. Switch appliance on.
2. Make sure appliance factory default settings are stored.
3. Place a plastic cup under the coffee spout.
4. Set grinder setting on position 7.
5. Fill water tank and bean compartment.
6. Press the
button.
7. During the cup is filled with Coffee measure the temperature.
8. Repeat step 6 – 7 once and note the highest measured temperature.
9. For validation see table below.
WATER TEMPERATURE MEASUREMENT PROCEDURE
1. Switch appliance on.
2. Make sure appliance factory default settings are stored.
3. Place a plastic cup under the steam nozzle.
4. Fill the water tank with water.
5. Press
the button and turn the steam knob open.
6. During the cup is filled with water measure the temperature.
7. Repeat step 5 – 6 once and note the highest measured temperature.
8. For validation see table below.
Beverage Function Temperature spec.
Coffee temperature (°C) Long Coffee ≥ 75°C
Hot water Water ≥ 70°C
REPAIR INSTRUCTIONS
= changed
To Next Page
Loading...
