Philips HD5730 - Brewing Milk-Based Drinks; Preparing for Cappuccino and Latte Macchiato

Brewing cappuccino or latte macchiato
1 Move the release slide towards you and remove the lid of the milk
jug.
2 Fill the milk jug with approx. 150ml milk for each cappuccino or latte
macchiato to be prepared.
- It is advisable to use fresh skimmed or fresh semi-skimmed milk at
refrigerator temperature (about 5°C).
3 Make sure the milk intake tube is properly inserted into the rubber
ring.
4 Put the lid on the milk jug.
5 Remove the hot water spout.
6 Attachthemilkjugrmlytothenozzle.Putasufcientlylargecup
under the coffee spout and move the milk frothing pipe towards the
cup.
Tip: For the best frothing result, preheat the milk frothing pipe by pressing
the CLEAN button on the milk jug.
ENGLISH14
4222.002.6507.7.indd 14 31-08-09 17:45