Philips HD8652/59 - Cleaning Milk Frother Parts; How to Clean the Automatic Milk Frother

Cleaning cycle with milk circuit cleaner and water.
1 Pour the content of a Saeco milk circuit cleaner sachet into the milk
carafe and fill the milk carafe with water up to the MAX level. Close the lid
of the milk carafe.
2 Insert the other end of the suction tube into the milk carafe till the
bottom of the milk carafe.
3 Place a large container under the milk dispensing spout.
4 Turn the control dial to the steam/milk clean icon.
-
The machine dispenses the cleaning solution through the milk
dispensing spout.
5 Let the machine dispense water until the water tank empty light lights up.
6 Detach the suction tube from the machine. Rinse the milk carafe
thoroughly and fill it with fresh water up to the MAX level.
7 Repeat steps 3 to 6.
Cleaning the parts of the automatic milk frother
The automatic milk frother comprises four parts that must be disassembled:
1
2
4
5
3
1 Suction tube
2 Milk frother lid
3 Rubber ring
4 Milk frother
5 Rubber cover
How to clean the automatic milk frother
1 Remove the automatic milk frother from the steam tube.
Caution: If the machine has been recently used, the steam tube and the
automatic milk frother could be hot.
2 Remove the suction tube from the milk frother lid.
3 Remove the rubber ring from the automatic milk frother.
16
English