Philips HearLink 9010 MNR T R - Activating Flight Mode

35
Flight mode
When boarding an airplane or entering an
area where it is prohibited to radiate radio
signals, e.g., during ight, ight mode must be
activated. It is only necessary to activate ight
mode on one hearing aid. When ight mode
is activated, only Bluetooth
®
is turned o. The
hearing aid will still be working.
To activate and
deactivate ight
mode press and
hold the Program
Button (lower part)
for 7 seconds.
LED ight mode deactivated: The LED will turn
steady red for a few seconds, until the hearing
aid returns to its normal operating mode.
Pressing the button on one hearing aid will
activate ight mode on both hearing aids.
See overview “Sound and LED indications”.
Beep:
The hearing aid plays
4 descending tones
followed by 4 tones to
indicate that ight mode is
activated or deactivated.
LED ight mode activated:
A long red blink followed
by green, red, red. The
LED will blink green, red,
red a few times. This
conrms that ight mode
is activated.