You can change the time and switch between a 12-hour clock
(AM/PM) and a 24-hour clock by pressing on the toggle icon (12/24).
Wi-Fi
Turn Wi-Fi on or off by pressing on the Wi-Fi icon. When Wi-Fi is
disabled
, any update made in the app will not be implemented
until the Wi-Fi connection is restored.
Note: Press and hold the Wi-Fi icon for 8 seconds to return to access
point mode. Open access point mode when you want to connect your
appliance to a different Wi-Fi network or if you have changed your
Wi-Fi password.
If you accidentally activated access point mode, remove the adapter
from the wall outlet. Wait for 30 seconds to connect the appliance to
the power outlet again. Your connected Sleep & Wake-Up Light
remembers the network you were connected to.
Audio feedback
When you press any menu icon, you hear a click. If you do not want to
hear clicks when you press an icon, press the audio feedback icon to
turn off the audio feedback. You hear one click as a confirmation. To
reactivate the audio feedback, press this icon again. You hear two
clicks to confirm that audio feedback has been activated.
Display
Display brightness
You can adjust the display brightness from level 1 to level 6. We advise
you to set the display contrast in a dark bedroom. Choose a contrast
level that is optimal for you to see the display at night. The display
contrast will increase to a higher level when the Connected Sleep &
Wake-up Light measures a lot of light in the bedroom. This happens
automatically, so you will always be able to see the display, even
when the surroundings are lighter.
Display on/off
If you do not want the appliance to produce any light (including time
indication), you can turn off the display completely by pressing the
display icon.
Normally, if you do not touch the display for some time in any menu,
the display reverts to time and status indication only. When the
display is off, no time indication is shown.
Press the crossed-out icon to turn on the display again.
15
English
To Next Page
Loading...
