If the sound is too loud or distorted when you have set the connected
Sleep & Wake-Up Light to a low volume setting, decrease the volume
of your music playing device.
Note: Press and hold the music note icon for 5 second to
activate/deactivate the sound via the menu. You can also deactivate
the sound by tapping the top of the appliance.
Note: You need an AUX cable to connect the connected Sleep &
Wake-Up Light to a music playing device.
Wind-down programs
The appliance features two wind-down programs to help you relax
before you fall asleep.
Note: Press and hold the wind-down icon for 5 seconds to
activate/deactivate the wind-down program. You can also deactivate
the active wind-down program by tapping the top of the appliance.
Sunset simulation
During the sunset simulation, the brightness of the light decreases
gradually with colors changing from bright yellow to warm orange to
soft red. You can set the duration of the sunset simulation and the
initial light intensity of the sunset simulation.
You can also select a sound that fades away during the sunset
simulation. You can set the sound source and the initial volume. You
can either choose a natural sound, radio or no sound. You can also
play your own music by connecting a music playing device to the AUX
socket.
Note: If you have set your sunset simulation in the setup wizard, it will
start immediately. If you have not set it, the appliance starts with a
default sunset simulation.
RelaxBreathe
RelaxBreathe uses the belly breathing technique as a basis for the
breathing program. You can choose one of the breathing programs,
guided by light or sound. The combination of the belly breathing
exercise and the guidance of the connected Sleep & Wake-Up Light
helps you slow down and feel relaxed.
17
English
To Next Page
Loading...
