EasyManua.ls Logo

Philips HF367X series - Safety and compliance

Philips HF367X series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FCC Information
-
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and the receiver.
-
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
-
This equipment complies with FCC radiation exposure limites set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20 cm
between the radiator and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
-
This Class B digital apparatus complies with Canadian ICES-005.
-
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
-
This device may not cause interference; and
-
This device must accept any interference, including interference that may cause undesired
operation of the device.
-
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
-
l'appareil ne doit pas produire de brouillage, et
-
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Specifications
Model
Rated input voltage adapter 100-240V AC
Rated input frequency adapter 50/60Hz
No-load power adapter <0.1W
Rated output voltage adapter 24V DC
Rated output power adapter 18W
Average Standby Power appliance
(Conditions: all functions suspended, ambient
light scenario: day 12h 500 lux, night 12h 0lux)
25
English
- Wi-Fi on and display at maximum
brightness < 2W
- Wi-Fi off and display maximum brightness
< 1W

Other manuals for Philips HF367X series

Related product manuals