Philips HI 910 User Manual

Service Manual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Provapor elance
HI 910
SAP coding HI 910
PRODUCT INFORMATION
Feataures : inox sole plate
boiler capacity 1 litre
length steam hose 1,9 metre
length cord set 1,9 metre
maximum steam output 50 gr/min
Voltage : 220-240 Volt
Frequency : 50-60 Hz
Power consumptium : Boiler : 1200 Watt
Pressure : 2 bar
Iron : 800 Watt
4322 277 00121
99/10
PCS 101 312
Product meets the requirements regarding interference
suppression on radio and television.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as laid
down offi cially established at this moment.
!
Service
Information

Philips HI 910 Specifications

General

Brand	Philips
Model	HI 910
Category	Iron
Language	English

Summary

Product Information and Specifications

Product Features Overview

Lists key product specifications including sole plate material, boiler capacity, steam hose length, cord set length, and maximum steam output.

Electrical and Power Specifications

Details the voltage, frequency, and power consumption for both the boiler and the iron unit.

Exploded View - Iron Assembly

Iron Parts List and Schematic

Iron Component Identification

Detailed listing of iron parts with position numbers, descriptions, and corresponding service numbers for replacement.

Disassembly and Assembly Advice - Iron

Iron Disassembly Steps

Instructions for removing components like the back plate, inlay, handle, and skirt, including wire management.

Thermostat Replacement and Adjustment

Procedure for replacing the thermostat (13), including conductor connection and crucial notes on its pre-adjustment.

Exploded View - Stand Assembly

Stand Parts List and Disassembly Advice

Stand Component Identification

Lists stand parts with position numbers, descriptions, and service numbers, alongside disassembly instructions.

Stand Opening Procedure

Instructions for opening the stand, with a note regarding potential breakage of assembly snaps.

Boiler Replacement Guidelines

Conditions under which the boiler (28) should be replaced, including safety valve activation and thermostat issues.