9
English
Problem Possible cause Solution
Water droplets comes
out of the soleplate.
After the Calc-Clean process
remaining water may drip
out of the soleplate.
Wipe the soleplate dry with a piece of cloth.
If the Calc-Clean light still ashes and the
appliance still beeps, perform the Calc-
Clean process (see chapter ‘Cleaning and
maintenance').
Dirty water and
impurities (brown stains,
white akes, etc.) come
out of the soleplate.
Impurities or chemicals
present in the water have
deposited in the steam
vents and/or soleplate.
Performs the Calc-Clean process regularly
(see chapter ‘Cleaning and maintenance').
Water ushes out of the
soleplate.
You have accidentally
started the Calc-
Clean process (see
chapter ‘Cleaning and
maintenance').
Switch o the appliance. Then switch it
back on again. Let the iron heat up until the
‘iron ready' light lights up steadily.
To Next Page
Loading...
