To Next PageTo Next Page
Need help?Do you have a question about the Philips HI5922 and is the answer not in the manual?
General| Iron power | 2400 W |
|---|---|
| Product color | Purple, White |
| Soleplate type | Ceramic soleplate |
| Water tank capacity | 1.1 L |
| Auto power off after | 8 min |
| Removable water tank | Yes |
| Maximum steam pressure | 5.2 bar |
| Steam boost performance | 300 g/min |
| Continuous steam performance | 110 g/min |
| AC input voltage | 220 - 240 V |
| Package depth | 230 mm |
| Package width | 390 mm |
| Package height | 270 mm |
| Package weight | 3500 g |
| Cord length | 4.06 m |
| Hose length | 1.4 m |
Weight and Dimensions| Width | 362 mm |
|---|---|
| Height | 263 mm |
| Weight | 3200 g |
| Iron weight | 1100 g |
Identifies key parts of the iron and steam generator system via numbered diagram.
Advises on water types and guide on adjusting temperature for fabric types.
Highlights critical safety advice regarding water use, hot surfaces, and chemical prohibitions.
Explains the automatic power-off function after 5 minutes of inactivity to conserve energy.
Overview of the descaling system designed to maintain steam output and prevent soleplate issues.
Step-by-step instructions for descaling and safety guidelines for the process.
Solutions for lack of steam, including temperature settings, and for loud pumping sounds.
Resolves Calc-Clean reminders and auto shut-off issues, often requiring specific processes.
Addresses water droplets, impurities, stains, and flushing from the soleplate.
