EasyManua.ls Logo

Philips HomeRun Aqua 3000 Series User Manual

Philips HomeRun Aqua 3000 Series
1048 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Aqua
HomeRun
Vacuum & Mop Robot
Aqua
Vacuum & Mop Robot
7000 Series

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Philips HomeRun Aqua 3000 Series and is the answer not in the manual?

Philips HomeRun Aqua 3000 Series Specifications

General IconGeneral
CategoryVacuum Cleaner
Battery Voltage14.4 V
Charging Time4 hours
App ControlYes
Obstacle AvoidanceYes
Cliff SensorYes
Automatic chargingYes
Aqua FilterYes
Noise Level65 dB
Cord LengthCordless
Model3000 Series
Dustbin Capacity400 ml
Battery TypeLithium-ion
Cleaning ModesAuto, Spot, Edge
Voice ControlYes
TypeRobot Vacuum
Dust Capacity0.5 L

Summary

Introduction

Product overview

Details the main components and parts of the robot.

Sensor overview

Explains the different sensors and their functions for navigation.

Before first use

Preparing for use

Install and fill the water tank

Instructions for filling the robot's water tank.

Install the robot and the station

Guide on positioning and setting up the charging station.

Charging the robot

Download the app, register, and connect to Wi-Fi

App content

Lists the features and support available within the HomeRun robot app.

Downloading the app

Instructions on how to download and install the Philips HomeRun robot app.

Registering a personal account

Details the benefits of creating a personal account and how to do it.

Setting up the Wi-Fi connection

Step-by-step guide to connect the robot to your home Wi-Fi network.

Audible signals

Set the language of the voice alert

Guide on how to change the robot's voice alert language.

How your robot works

Create a mapping

Explains the process of the robot mapping your home environment.

Map Edit

How to edit and customize room layouts, restricted areas, and maps.

Preparing the room for mapping

Steps to prepare the environment before the robot starts mapping.

Creating a map

Detailed instructions on how the robot creates a floor map.

Tell your robot where not to clean with restricted cleaning zones

Virtual wall and No-Go zone

How to set virtual walls and no-go zones to define cleaning boundaries.

No-Mop zone

How to create zones where the robot should not mop.

Gentle zone

How to define areas where the robot should navigate gently.

How your robot cleans

Routine

Options for regular and custom cleaning routines.

Set cleaning preferences, advanced settings and cleaning order

How to fine-tune cleaning modes, preferences, and order for rooms.

Regular cleaning

Custom cleaning

Cleaning modes

Wet & dry

Robot vacuums and mops simultaneously for general cleaning.

Dry

Robot only vacuums, suitable for areas not needing mopping.

Quiet

Low-noise cleaning with reduced suction and muted alerts.

Intensive

High-power cleaning for thoroughness, recommended for small areas.

Individual

Allows custom selection of all expert settings for cleaning.

Cleaning preferences

Advanced settings

Using your robot

Preparing for a cleaning run

Steps to prepare the robot and environment before starting a cleaning cycle.

Start your first cleaning program via the app

How to start the robot's first cleaning session using the mobile app.

Stop

Instructions on how to pause, resume, or stop the robot's cleaning.

Using the robot without the app

How to operate the robot using its physical buttons without the app.

Your robot's cleaning pattern

Returning to the station

Auto recharge and resume

Cleaning and maintenance

When to do maintenance

Table outlining recommended cleaning and replacement intervals for parts.

Cleaning the washable mop pad

Emptying the dust bin

Cleaning and drying the dust bin

How to clean and properly dry the dustbin.

Cleaning the washable filter

Cleaning the main brush

Cleaning the side brush

Cleaning the main wheels and the front caster wheel

Replacing the dust bag (XU7100)

Removing blockages from the Auto-Empty inlet (XU7100)

Cleaning the water tank

Long term storage

User interface signals and their meaning

Reset/restore the robot

Replacement

Ordering accessories

Information on where to purchase replacement parts and accessories.

Warranty and support

Disposal and recycling

Troubleshooting

Related product manuals