your country, turn to your local Philips dealer or
contact the Service Department of Philips
Domestic Appliances and Personal Care BV.
Troubleshooting
1 Reduced shaving performance.
B
Cause 1: the shaving heads are dirty.
B
The shaver has not been cleaned well enough or
has not been cleaned for a long time.
◗ Clean the shaver thoroughly before you
continue shaving (see chapter 'Cleaning and
maintenance').
B
Cause 2: long hairs are obstructing the shaving
heads.
C
◗ Remove the shaving unit, turn the wheel
anticlockwise and remove the retaining frame.
C
◗ Clean the cutters and guards.
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
◗ Remove the hairs with the brush supplied.
◗ Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit and turn the wheel clockwise.
ENGLISH12
To Next Page
Loading...
