Important
Read these instructions for use carefully before
using the appliance and save them for future
reference.
◗ Only use the mains cord supplied.
◗ Do not use a damaged mains cord.
◗ If the mains cord is damaged, always have it
replaced by one of the original type in order
to avoid a hazard.
◗ The appliance is equipped with an automatic
voltage selector and is suitable for mains
voltages ranging from 100 to 240 volts.
C
◗ Make sure the appliance and the mains cord
do not get wet.
◗ Charge, store and use the appliance at a
temperature between 5cC and 35cC.
◗ Do not recharge the shaver in a closed pouch.
Charging
When you charge the shaver for the first time or
after a long period of disuse, let it charge
continuously for 24 hours.
Charging normally takes approx. 16 hours.
Do not leave the appliance connected to the
mains for more than 24 hours.
Do not recharge the shaver in a closed pouch.
C
1 Put the appliance plug in the shaver.
ENGLISH4
To Next Page
Loading...
Need help?
General
