Philips HS1 - User Manual

Get Started
Guide
Congratulations you
are minutes away from
having a life-saving
Defibrillator visible and
ready to respond at
your location.
Your Defibrillator contents should include:
HeartStart Quick Setup Guide booklet
Mini folder for contents
Defibrillator case
Defibrillator
Emergency Response Plan
A4 Sticker & A6 sticker
PHILIPS HS1 DEFIBRILLATOR

Philips HS1 Specifications

General

Type	Automated External Defibrillator (AED)
Pads Life	2 years
Operating Temperature	0°C to 50°C (32°F to 122°F)
Shock Delivery	Biphasic
Energy Levels	150 J (fixed)
CPR Guidance	Yes
Self-Testing	Daily, weekly, monthly self-tests
Battery Type	Lithium manganese dioxide (LiMnO2)
Energy Selection	Automatic (adult and child)
Data Recording	Event data recording (ECG and events)

Summary

How to Set Up Your Defibrillator

Activate the Defibrillator

Remove the green tag to start the AED self-test and listen for a beep.

Initiate Shock Delivery

When instructed, firmly press the shock button to deliver a shock.

Confirm Readiness

Wait one minute for the voice prompt 'Ready for use' and check for a blinking green ready light.

Install and Register

Install the defibrillator in a visible, accessible, secure location and register it.

Maintain Your Defibrillator

Regular maintenance is important; refer to the HeartStart Quick Setup Guide booklet.