Philips HSB2313 - Select equalizer settings; Mute sound; Enable audio sync; Use more of your home theater system

15
7 Use more of your
home theater
system
Set timer
The home theater system can turn on
automatically at a set time.
1 Ensure that you have set the clock correctly.
2 In standby mode, press and hold TIMER .
The TIMER is displayed and hour digits »
begin to blink.
3 Press + VOL - to set the hour.
4 Press TIMER to confi rm.
The minute digits begin to blink. »
5 Press + VOL - to set the minute.
6 Press TIMER to confi rm.
The mode indicator begins to blink. »
7 Press + VOL - to select [ON] (on).
A clock icon appears on the display. »
The system turns on automatically at the »
set time and switches to USB mode.
To deactivate the alarm timer, repeat »
steps above and select [OFF] (off) mode.
Set sleep time
1 When the system is turned on, press SLEEP
repeatedly to select a set period of time (in
minutes).
The system turns off automatically in the »
selected time.
Select equalizer settings
1 During USB play, press MUSIC SOUND
repeatedly to select:
• [POP]
• [JAZZ]
• [ROCK]
• [CLASSIC]
• [NORMAL]
Mute sound
1 During play, press MUTE to mute/unmute
sound.
Enable audio sync
If the video signal sent to the TV is slower than
the audio streams, you can synchronize audio and
video by delaying the audio output.
1 Press AUDIO SYNC repeatedly to select a
delay time: 10, 20, 30 ...100, 110 ...190, 200.
To disable audio sync, press • AUDIO
SYNC repeatedly to select OFF .
English
EN