EasyManua.ls Logo

Philips HSB4383/12 - No picture on HDMI connection; No disc detected; Black and white or distorted picture; No sound or poor sound

Philips HSB4383/12
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Disc does not play
Insert a readable disc and ensure that the •
label side faces outwards.
Check the disc type, color system and •
regional code. Check for any scratches or
smudges on the disc.
Press•
OPTIONS to exit the system
setup menu.
Disable the password for parental control •
or change the rating level.
Moisture has condensed inside the system. •
Remove the disc and leave the system
turned on for about an hour. Disconnect
and reconnect the AC power plug, and
then turn on the system again.
As a power-saving feature, the system •
turns off automatically 15 minutes after
disc play reaches the end and no control is
operated.
Poor radio reception
Increase the distance between the unit and •
your TV or VCR.
Fully extend the FM antenna.•
Connect an outdoor FM antenna instead.•
Wireless connection fails.
• Set up wireless connection manually (see
‘Set up wireless connection manually’ on
page 16).
Unable to select Progressive Scan
Ensure the component video mode is set •
to [YUV].
No sound on HDMI connection.
You may not hear any sound if the •
connected device is non-HDCP compliant
or only DVI-compatible.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or •
subtitles in multiple languages.
The audio or subtitle language setting is •
prohibited on the disc.
English
EN

Table of Contents