Philips HTB3540 - Software Upgrade

4‐1

Softwareupgrade

1.BuildafoldernameasUPGunderrootmenuofUSBdevice.
3.CopytheHTB3570.binfile(upgradefile)totherootmenuofUSBdevice.
4.ConnecttheUSBdevicetoHTS,
5.PoweronDUT,enterintoHOMEUI.
6.EnterintoSetupmenuselectAdvance>>Softwareupgrade>>USB.IftheupgradeSWwasfound,itwill
promptstartupgradeSW,plspressokselectStart.
7.Don’tpoweroffDUT.DUTwillrestartafterSWupgradecompleted.
Caution:Thesetmustnotbepoweroffduringupgrading,Otherwise theMainboardwillbedamaged
entirely.