Philips HTB3580 User Manual

12 EN
Set up the audio
If you cannot hear the audio output of a
connected device through your home theater
speakers, do the following:
• Check that you have enabled EasyLink
on all the devices, (see 'Set up EasyLink
(HDMI-CEC control)' on page 11) and
• on your TV, set the audio output to
"Amplier" (instead of TV speakers). For
details, see the TV user manual, and
• setup the EasyLink audio control.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [EasyLink] > [System Audio
Control] > [On].
• To play the audio from the TV
speakers, select [Off], and skip the
following steps.
4 Select [EasyLink] > [Audio Input
Mapping].
5 Follow the onscreen instructions to map
the connected device to the audio inputs
on your home theater.
• If you connect your home theater
to the TV through an HDMI ARC
connection, make sure that the TV
audio is mapped to the ARC input on
your home theater.
Connect and set up a home
network
Connect your home theater to a network
router for a network setup, and enjoy:
• Streamed multimedia content (see 'Browse
PC through DLNA' on page 21)
• Smart TV (see 'Browse Smart TV' on page
20)
• BD Live applications (see 'BD-Live on Blu-
ray' on page 15)
• Software update (see 'Update software
through the Internet' on page 28)
Caution
•
Familiarize yourself with the network router, media
server software and networking principles. If necessary,
read documentation that accompanies the network
components. Philips is not responsible for lost, damaged,
or corrupt data.
Before you start
• For Smart TV and software updates, make
sure that the network router has access to
the Internet with high-speed connection
and is not restricted by rewalls or other
security systems.
• Make the necessary connections described
in the quick start guide, and then switch
the TV to the correct source for your
home theater.
Set up the wired network
What you need
• A network cable (RJ45 straight cable).
• A network router (with DHCP enabled).
1 Using a network cable, connect the LAN
connector on your home theater to the
network router.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Network] > [Network
installation] > [Wired (Ethernet)].
5 Follow the onscreen instructions to
complete the setup.
• If connection fails, select [Retry], and
then press OK.
LAN
www

Philips HTB3580 Specifications

General

Number of satellite speakers	2
Satellite speaker frequency range	150 - 20000 Hz
Center speaker peak power	166 W
Subwoofer type	Passive subwoofer
Bass adjustment	Yes
Subwoofer frequency range	20 - 150 Hz
Subwoofer driver diameter (imperial)	6.5 \
Supported radio bands	FM
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	160 W
MP3 bit rates	8 - 320 Kbit/s
Audio decoders	DTS-HD Master Audio, Dolby Digital 5.1, Dolby TrueHD
RMS rated power	1000 W
Audio output channels	5.1 channels
Audio formats supported	AAC, ADTS, FLAC, MKA, MP3, WAV, WMA
Total Harmonic Distortion (THD)	10 %
Package depth	376 mm
Package width	954 mm
Package height	494 mm
Karaoke	No
Product color	Black
Type of shelf-placement	Laying
Tallboy speaker output power	4 x 166W
HDMI in	0
USB version	2.0
HDMI version	1.4
Digital audio coaxial in	1
Consumer Electronics Control (CEC)	EasyLink
Video formats supported	AVCHD, DIVX HD, H.264, MPEG1, MPEG2, MPEG4
Battery type	AAA
Package type	Carton
Package weight	26300 kg
Picture enhancement	HD (720p, 1080i, 1080p/ 24fps)
Image formats supported	GIF, JPG, PNG
Disc types supported	BD, BD-R, BD-RE, CD, CD-DA, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Playback disc formats	SVCD, VCD
Optical disc player type	Blu-Ray player
Cables included	AC
Tare weight outer carton	3.08 kg

Weight and Dimensions

Main unit weight	2614 g
Main unit dimensions (WxDxH)	435 x 280 x 58 mm
Subwoofer dimensions (WxDxH)	228 x 310 x 293 mm
Center speaker dimensions (WxDxH)	314 x 110 x 83 mm
Satellite speaker dimensions (WxDxH)	100 x 101 x 1143 mm