Philips HTB3580 User Manual

28 EN
Step 1: Download the latest software
1 Connect a USB ash drive to your
computer.
2 In your web browser, go to
www.philips.com/support.
3 At the Philips Support website, nd your
product and locate the Software and
drivers.
» The software update is available as a
zip le.
4 Save the zip le in the root directory of
your USB ash drive.
5 Use the archive utility to extract the
software update le in the root directory.
» The les are extracted under the UPG
folder of your USB ash drive.
6 Disconnect the USB ash drive from your
computer.
Step 2: Update the software
Caution
•
Do not switch off the home theater or remove the
USB ash drive during the update.
1 Connect the USB ash drive containing the
downloaded le to your home theater.
• Make sure that the disc compartment
is closed and no disc inside.
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software update]
> [USB].
5 Follow the onscreen instructions to
conrm the update.
» Update process takes about 5 minutes
to complete.
Update software through the
Internet
1 Connect your home theater to a home
network with a high-speed Internet access
(see 'Connect and set up a home network'
on page 12).
2 Press (Home).
3 Select [Setup], and then press OK.
4 Select [Advanced] > [Software update] >
[Network].
» If an upgrade media is detected, you
are prompted to start or cancel the
update.
» Downloading of the upgrading le may
take long, depending on your home
network condition.
5 Follow the onscreen instructions to
conrm the update.
» Update process takes about 5 minutes
to complete.
» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.

Philips HTB3580 Specifications

General

Number of satellite speakers	2
Satellite speaker frequency range	150 - 20000 Hz
Center speaker peak power	166 W
Subwoofer type	Passive subwoofer
Bass adjustment	Yes
Subwoofer frequency range	20 - 150 Hz
Subwoofer driver diameter (imperial)	6.5 \
Supported radio bands	FM
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	160 W
MP3 bit rates	8 - 320 Kbit/s
Audio decoders	DTS-HD Master Audio, Dolby Digital 5.1, Dolby TrueHD
RMS rated power	1000 W
Audio output channels	5.1 channels
Audio formats supported	AAC, ADTS, FLAC, MKA, MP3, WAV, WMA
Total Harmonic Distortion (THD)	10 %
Package depth	376 mm
Package width	954 mm
Package height	494 mm
Karaoke	No
Product color	Black
Type of shelf-placement	Laying
Tallboy speaker output power	4 x 166W
HDMI in	0
USB version	2.0
HDMI version	1.4
Digital audio coaxial in	1
Consumer Electronics Control (CEC)	EasyLink
Video formats supported	AVCHD, DIVX HD, H.264, MPEG1, MPEG2, MPEG4
Battery type	AAA
Package type	Carton
Package weight	26300 kg
Picture enhancement	HD (720p, 1080i, 1080p/ 24fps)
Image formats supported	GIF, JPG, PNG
Disc types supported	BD, BD-R, BD-RE, CD, CD-DA, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW
Playback disc formats	SVCD, VCD
Optical disc player type	Blu-Ray player
Cables included	AC
Tare weight outer carton	3.08 kg

Weight and Dimensions

Main unit weight	2614 g
Main unit dimensions (WxDxH)	435 x 280 x 58 mm
Subwoofer dimensions (WxDxH)	228 x 310 x 293 mm
Center speaker dimensions (WxDxH)	314 x 110 x 83 mm
Satellite speaker dimensions (WxDxH)	100 x 101 x 1143 mm