Philips htb9550d - Page 44

44EN
• Move the speakers to a different position,
and then calibrate again.
• Follow all the steps for auto calibration
(see 'Automatic calibration' on page 15).
• If you cannot calibrate the speakers
automatically, or you are not happy with
the automatic settings, calibrate the
speakers manually (see 'Manual setup' on
page 16).
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 39).
• Make sure that the home theater supports
the region code of the disc.
• If the disc is a DVD±RW or DVD±R disc,
make sure that it is nalized.
CannotplayaDivXle.
• Make sure that the DivX le is encoded
according to the 'Home Theater Prole'
with the DivX encoder.
• Make sure that the DivX le is complete.
DivX or RMVB/RM subtitles do not display
correctly.
• Make sure that the subtitle le name is
the same as the movie le name (see
'Subtitles' on page 21).
• Select the correct character set: 1) Press
OPTIONS. 2) Select [Character set]. 3)
Select the supported character set. 4)
Press OK.
Cannot read the contents of a USB storage
device.
• Make sure that the format of the USB
storage device is compatible with the
home theater.
• Make sure that the le system on the USB
storage device is supported by the home
theater.
'No entry' or 'x' sign appears on the TV.
• The operation is not possible.
EasyLink does not work.
• Make sure that the home theater is
connected to a Philips brand EasyLink TV,
and the EasyLink option is turned on (see
'Set up EasyLink (HDMI-CEC control)' on
page 16).
• For TVs from different manufacturers, the
HDMI CEC could be called differently.
Check theTV user manual on how to
enable it.
When you switch on the TV, the home theater
automatically switches on.
• This behavior is normal when you are using
Philips EasyLink (HDMI-CEC). To make the
home theater work independently, switch
off EasyLink.
Cannot access BD-Live features.
• Make sure that the home theater is
connected to the network. Use a wired
network connection or wireless network
connection.
• Make sure that the network is set up. Use
a wired network installation or wireless
network installation.
• Make sure that the Blu-ray disc supports
BD-Live features.
• Clear memory storage.
Cannot play video or photos from an iPod or
iPhone on the TV.
• Browse and select videos and photos from
the iPod or iPhone screen, and play them
on your TV.
• Make sure that the iPod or iPhone
software has not been tampered with or
illegally modied.
Cannot view pictures from an iPod or iPhone
on the TV.
• Connect a yellow composite cable to the
iPod dock and the TV.
• Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite
cable).